.blem. ar-15 sbr 10.5' ultralight barrel, chrome-lined $ 289.99 $ 239.99.BLEM. AR-15 HYBRID BARREL, MID-LENGTH GAS, CHROME-LINED $ 289.99 $ 239.99 Best Selling. Long term usage of the M110 has led the US Army to request a more compact and lightened version of the M110 to be issued to its designated spotters. The primary shooter will then be afforded the in-development.300 Winchester Magnum-chambered 'XM2010 Enhanced Sniper Rifle (ESR)' which is intended to formally replace the M24 SWS family, a. Winner of the U.S. Army award as one of the 'Best 10 Inventions' of 2007, the M-110 Semi-Automatic Sniper System (M-110 SASS) is a precision 7.62mm NATO caliber, gas-operated rifle that is highly acclaimed for its battlefield performance.
Krieger Barrels has been making premium rifle barrels for over 30 years. All of our barrels are manufactured using single-point cut-rifling and each and every barrel we make is thoroughly inspected and held to the same premium match grade standards, whether its an ammunition test barrel, a custom bolt action barrel or a ready-to-install finish chambered AR15.
- Bolt Action
- Browse and buy with Krieger Direct
- Go custom
- Calibers
- Contours
- Twist Rates
- Services
- Service Rifle
- AR-15
- Browse and buy with Krieger Direct
- Go custom
- Calibers
- Contours
- Twist Rates
- Services
- AR-10
- Go custom
- Calibers
- Contours
- Twist Rates
- Services
- Ruger Precision Rifle Barrels
- M1 Garand
- Go custom
- Calibers
- Contours
- Twist Rates
- Services
- M1A / M14
- Browse and buy with Krieger Direct
- Calibers
- Contours
- Twist Rates
- Services
- M1903
- Go custom
- Calibers
- Contours
- Twist Rates
- Services
- Test Barrels
- Submit an inquiry
- Or, give us a call at (262) 628-8558
- Or, send your inquiry by fax to: 262-628-8748.
- Other Products
From 20 caliber to 4 bore Krieger Barrels makes fully custom bolt gun blanks. Whether you are looking for areplacement barrel or putting together a custom rifle, Krieger Barrels will make the barrel you need. Choose from our catalog or specify yourcontour, caliber and twist rate. In some cases you can even specify the number of grooves, groove width and custombore and groove dimensions. Fluting, muzzle threads, and many other services are available.
All of our barrels are single-point cut-rifled and thoroughly inspected to produce satisfaction guaranteed match-grade rifle barrelsevery time. Order online or give us a call at (262) 628 - 8558 to place your order today!
- Order Online Now:
Learn more::
Krieger Barrels stocks Service Rifle Competition legal barrel profiles for M1 Garand, M1A/M14 and M1903 as well as AR-15 DCM and M110. We make custom variations on these profiles as well, but our service rifles are designed to be NRA Service Rifle Competition legal.
Krieger Barrels makes finish chambered AR-15 barrels in multiple lengths and contours. Our DCM contours are service rifle match legal and youcan get them in chrome moly or stainless steel while our heavy stainless steel Varmatch barrels are available in multiple lengths and muzzlediameters. Fluting, muzzle threads, fitting and assembly as well as many other services are available. KriegerBarrels regularly makes AR-15 barrels in .22 caliber but we do make AR-15 barrels in other calibers also, depending on our current backlog. Ask us about it.
All of our barrels are single-point cut-rifled, hand lapped and thoroughly inspected to produce satisfaction guaranteed match-grade rifle barrelsevery time. Order online or give us a call at (262) 628 - 8558 to place your order today!
- Order Online Now:
Learn more::
Krieger Barrels makes finish chambered AR-10 barrels in multiple lengths and contours. Our M110 contours areservice rifle match legal while our heavy DPMS barrels are available in multiple lengths and muzzle diameters. Fluting, muzzle threads, fittingand assembly as well as many other services are available. Krieger Barrels regularly makes AR10 DPMS barrels in.22 to .308 calibers.
All of our barrels are made to the same exacting standards, every barrel is single-point cut-rifled, hand lapped and thoroughly inspectedto produce satisfaction guaranteed match-grade rifle barrels every time. Order online or give us a call at(262) 628 - 8558 to place your order today!
- Order Online Now:
Learn more::
Contour | Caliber | Bore | Groove | Twist | MuzzDia/Len | Chamber | Base Price |
Ruger Precision Rifle | 6MM | 0.237 | 0.243 | 1-7.5 | .900@26' | 6XC | $575.00 |
Ruger Precision Rifle | 6MM | 0.237 | 0.243 | 1-7.5 | .900@26' | 6MM Creedmoor | $575.00 |
Ruger Precision Rifle | 6MM | 0.237 | 0.243 | 1-7.5 | .900@26' | 243 Winchester | $575.00 |
Ruger Precision Rifle | 6.5MM | 0.256 | 0.264 | 1-7.5 | .750@26' | 6.5 Creedmoor | $575.00 |
Ruger Precision Rifle | 6.5MM | 0.256 | 0.264 | 1-7.5 | .900@26' | 6.5 Creedmoor | $575.00 |
Ruger Precision Rifle | 6.5MM | 0.256 | 0.264 | 1-8 | .900@26' | 6.5 Creedmoor | $575.00 |
Ruger Precision Rifle | 6.5MM | 0.256 | 0.264 | 1-8 | .900@26' | 6.5PRC | $575.00 |
Ruger Precision Rifle | 6.5MM | 0.256 | 0.264 | 1-8 | .750@26' | 6.5 Creedmoor | $575.00 |
Ruger Precision Rifle | .308 | 0.300 | 0.308 | 1-10 | .750@24' | .308 WINCHESTER | $575.00 |
Ruger Precision Rifle | .308 | 0.300 | 0.308 | 1-10 | .900@26' | .308 WINCHESTER | $575.00 |
Ruger Precision Rifle | .308 | 0.300 | 0.308 | 1-9 | .900@26' | .300 Win Mag | $575.00 |
Drop-in Ready Barrels: Finish chambered and threaded for your action with factory-spec muzzle threads.
Thanks to Ruger's proprietary barrel nut design, a competent gusnmith will be able to swap out your barrel using an AR15 barrel wrench and proper headspace gauges.
Krieger Barrels makes M1 Garand barrels in both GI and Heavy pattern contours. Our GI pattern M1 Garandsare John C. Garand/CMP Match legal while our heavy pattern Garands are NRA service rifle match legal and available in stainless steel andchrome moly. Various services are available. Specify if youwill be shooting .30-06 or .308 so we can drill the proper gas port.
These barrels are ready for the professional builder; they are 4-groove, 30 caliber barrels available in stainless steel and chrome moly.Our chrome moly barrels are parkerized as standard for no extra charge and our stainless barrels can receive a satin bead blast on request.Barrels ship completely turned, threaded, and milled; ready for your gunsmith to bring into proper timing byremoving .005' to .010' from the barrel shoulder. The gas port is always drilled into a groove; gas cylinder, receiver threads, feed ramps,and extractor groove are all timed off of this groove. All critical dimensions are precision ground between centers and concentric with the bore.
All of our barrels are made to the same exacting standards, every barrel is single-point cut-rifled, hand lapped and thoroughly inspectedto produce satisfaction guaranteed match-grade rifle barrels every time. Order online or give us a call at(262) 628 - 8558 to place your order today!
- Order Online Now:
Learn more::
Krieger Barrels makes M1A / M14 barrels in Heavy, Medium and Bush pattern contours.Our Heavy pattern M14's are service rifle match legal while our medium and bush patterns are lighter and shorter (respectively). Various services are available.
These barrels are ready for the professional builder; they are 4 groove, .308 caliber barrels, available in chrome moly and stainless steel.Our chrome moly barrels are parkerized as standard for no extra charge and our stainless barrels can receive a satin bead blast on request.Barrels ship completely turned, threaded, and milled; ready for your gunsmith to bring into proper timing byremoving .005' to .010' from the barrel shoulder. The gas port is always drilled into a groove; gas cylinder, receiver threads, feed ramps,and extractor groove are all timed off of this groove. All critical dimensions precision ground between centers concentric with the bore.
All of our barrels are made to the same exacting standards, every barrel is single-point cut-rifled, hand lapped and thoroughly inspectedto produce satisfaction guaranteed match-grade rifle barrels every time. Order online or give us a call at(262) 628 - 8558 to place your order today!
- Order Online Now:
Learn more::
Krieger Barrels makes springfield M1903 barrels in both the M1903 and M1903-A3 configurations.Various services are available.Specify whether you will be shooting .30-06 or .308 se we can cut the proper chamber (if applicable).
These barrels are ready for the professional builder; they are 4-groove, 30 caliber barrels available in chrome moly.These barrels are parkerized as standard for no extra charge. The timing mark, breech cone, extractor cut, and front sight area are allmachined to GI Specs. Barrels ship completely turned, threaded, and milled; ready for your gunsmith to bringinto proper timing by removing .005' to .010' from the barrel shoulder. All critical dimensions precision ground between centersconcentric with the bore.
All of our barrels are made to the same exacting standards, every barrel is single-point cut-rifled, hand lapped and thoroughly inspectedto produce satisfaction guaranteed match-grade rifle barrels every time. Order online or give us a call at(262) 628 - 8558 to place your order today!
- Order Online Now:
Learn more::
Krieger Barrels regularly produces precision, custom Ammunition Test Barrels for Pressure, Velocity, and Accuracy in all the calibers from our standard bolt action barrel catalog, chambered in a wide variety of cartridges. We manufacture our test barrelsfor the Standard Universal Receiver, 1903 Accuracy, Remington Accuracy, or made to your custom specifications. Gta vice city hidden package maps. All of our test barrels canbe made to the exact twist, bore diameter, groove diameter, number of grooves and groove width that the customer requires with all requireddocumentation and certification.
Our pressure test barrels can be shipped with the required pressure ports: Piezo or Piston Port. We can also supply the Pistons at anadditional cost.
Pricing starts at $340.00 (shipping included), please let us know your requirements so that we can quote you pricing and lead times.
National Match Aperture Hood and Rack Assembly: M1 Garand & M1A / M14
Converts your M1 Garand from 1 minute elevation to ½ minute elevation by rotating the hood. Available in both .0595' and .0520' peep hole diameters.For accuracy reasons, this unit MUST be custom fit to your sight base by a gunsmith (included with our fitting and assembly.(Distributors, call for special quantity pricing.)
Price: $40.00
Oversize Op Rod Guide: M1A / M14 Heavy Pattern
This replaces the standard op-rod guide and is required for our heavy contour barrels to accommodate the larger diameter.(Included free of charge with our Heavy Pattern M1A barrels.) Need an extra?
Price: $30.00
Krieger Varmatch™ Floating handguard systems: ARM-10A
Used in conjunction with an AR-15 Varmatch™ barrel, this system is furnished with a black aluminum tube,receiver nut, hollow retention bolt, tube retention collar, and bipod stud. Instructions included. Weighs 1.6#.
Price: $89.00
Krieger Varmatch™ Floating handguard systems: ARM-20A
Same as above system, but aluminum tube is slotted on the bottom and includes a detachable forearm stop which allows it to easily betransformed from match rifle to varmint rifle. Instructions included. Weighs 2.2#.
Price: $122.00
Krieger DCM Floating handguard systems: VM16-10
Used in conjunction with our DCM barrels or on similar AR-15s. Legal for NRA Service Rifle Comp. No welding, brazing, machining required. Complete with handguards,delta ring, and all necessary hardware. Already modified and ready for assembly. Instructions included. Weighs 3.4#. Note that this handguard cannot be used with our .750' gas block. This handguard is designed to be used with a modified A2 front sight, or a modified low profile gas block.
Price: $179.00
Carbine Length Gas Tube: AR-15
If needed, we can ship a carbine length gas system with your AR-15 carbine barrel.
Price: $15.00
Mid Length Gas Tube: AR-15
If needed, we can ship a mid length gas system with your AR-15 midlength/midweight barrel.
Price: $15.00
Rifle Length Gas Tube: AR-15
If needed, we can ship a Rifle length gas system with your DCM or Varmatch barrel (20-26 IN).
Price: $15.00
Long Length Gas Tube
If needed, we can ship this with your 28 IN Varmatch barrels. These barrels do not accept a rifle length gas tube.
Price: $20.00
0.750 inch Gas Block
If needed, we can ship this gas block with your carbine, midlength and dcm barrel.This .750' gas block cannot be used with our VM16-10 DCM/Service Rifle handguard system. Our handguard is designed to be used with a modified A2 front sight, or a modified low profile gas block.
Price: $35.00
0.875 inch Gas Block
If needed, we can ship this gas block with your M110 barrel.
Price: $35.00
0.936 inch Gas Block
If needed, we can ship this gas block along with your Varmatch™ or AR-10 DPMS barrel.
Price: $35.00
Barrel Extension
All AR-15, AR-10 barrels supplied timed to barrel extensions, locator pin. No charge with barrel order.
definition - m110 semi automatic sniper system
definition of Wikipedia
Advertizing ▼
Wikipedia
M110 Semi-Automatic Sniper System | |
---|---|
The M110 Semi-Automatic Sniper System | |
Type | Sniper rifle |
Place of origin | United States |
Service history | |
In service | 2008[citation needed]–present |
Wars | War in Afghanistan War in Iraq |
Production history | |
Manufacturer | Knight's Armament Company |
Specifications | |
Weight | 6.94 kg (15.3 lb) with scope, bipod and a loaded 20-round detachable box magazine |
Length | 1,029 mm (40.5 in) (buttstock fully compressed) 1,181 mm (46.5 in) (buttstock fully compressed and suppressor attached) |
Barrel length | 508 mm (20 in) |
Cartridge | 7.62×51mm NATO |
Caliber | .308 inches |
Action | Gas-operated, rotating bolt |
Rate of fire | Semi-automatic |
Muzzle velocity | 783 m/s (2,570 ft/s) with 175 gr. M118LR |
Effective range | 800 metres (875 yd) (point targets) |
Feed system | 10 or 20-round detachable box magazine |
The M110 Semi-Automatic Sniper System (or M110 SASS) is a semi-automaticsniper rifle that is chambered for the 7.62x51mm NATO round, developed by the American firearm manufacturer Knight's Armament Company.
Overview
The M110 Semi-Automatic Sniper System is intended to replace the M24 Sniper Weapon System used by snipers, spotters, designated marksman, or squad advanced marksmen in the United States Army. However, the Army still acquired M24s from Remington until February 2010.[1] After witnessing the effects of USSOCOM snipers and extensive after-action reports from SOF snipers throughout the Iraqi theater of operations, the U.S. Army ran a competition involving several designs, including rifles from Knight's Armament Company, Remington, and DPMS Panther Arms.[citation needed] Fas machine manual. On September 28, 2005, the Knight's Armament Co. rifle won the competition and was selected to be the M110 Semi-Automatic Sniper System. In April 2008, U.S. Army soldiers from Task Force Fury in Afghanistan were the first in a combat zone to receive the M110. The troops rated the weapon very highly, noting the quality of the weapon and its semi-automatic capabilities compared to the bolt-action M24. The United States Marine Corps will also be adopting the M110 to replace some M39 and all Mk 11 as a complement to the M40A5.[2] It is manufactured by Knight's Armament Company in Titusville, Florida, though the complete system incorporates a Leupold 3.5–10x variable power daytime optic, Harris swivel bipod, AN/PVS-26 or AN/PVS-10night sight and PALs magazine pouches of yet unpublished origin.[citation needed] The rifle has ambidextrous features such as a double-sided magazine release, safety selector switch, and bolt catch.
The M110 Semi-Automatic Sniper System (or M110 SASS) is a semi-automaticsniper rifle that is chambered for the 7.62x51mm NATO round, developed by the American firearm manufacturer Knight's Armament Company.
Overview
The M110 Semi-Automatic Sniper System is intended to replace the M24 Sniper Weapon System used by snipers, spotters, designated marksman, or squad advanced marksmen in the United States Army. However, the Army still acquired M24s from Remington until February 2010.[1] After witnessing the effects of USSOCOM snipers and extensive after-action reports from SOF snipers throughout the Iraqi theater of operations, the U.S. Army ran a competition involving several designs, including rifles from Knight's Armament Company, Remington, and DPMS Panther Arms.[citation needed] Fas machine manual. On September 28, 2005, the Knight's Armament Co. rifle won the competition and was selected to be the M110 Semi-Automatic Sniper System. In April 2008, U.S. Army soldiers from Task Force Fury in Afghanistan were the first in a combat zone to receive the M110. The troops rated the weapon very highly, noting the quality of the weapon and its semi-automatic capabilities compared to the bolt-action M24. The United States Marine Corps will also be adopting the M110 to replace some M39 and all Mk 11 as a complement to the M40A5.[2] It is manufactured by Knight's Armament Company in Titusville, Florida, though the complete system incorporates a Leupold 3.5–10x variable power daytime optic, Harris swivel bipod, AN/PVS-26 or AN/PVS-10night sight and PALs magazine pouches of yet unpublished origin.[citation needed] The rifle has ambidextrous features such as a double-sided magazine release, safety selector switch, and bolt catch.
Design
The rifle is similar to the SR-25/Mk 11 Mod 0, but differs significantly in buttstock and rail system design. The SR-25, Mk 11 Mod 0, and M110 are based loosely on the original AR-10 developed by Eugene Stoner but feature additional refinements instituted by KAC to maximize parts commonality with the AR-15 design, improve weapon reliability, and increase accuracy.
The main differences between the Mk 11 and M110 are improvements suggested by a user group meeting between NAVSPECWAR, USASOC and USA in 2007:
- The rail system used: the KAC Free Floated RAS on the Mk 11 is replaced by a URX modular rail system with integral folding front 600 meter back-up iron sight.
- The M110 buttstock: fixed, though the buttplate is adjustable for length of pull to match user preferences. Adjustment can be made without tools via a notched hand-tightened knob on the right-hand side of the stock. This feature was added during the change from XM110 to M110. The fixed buttstock also features integral quick-detachable sling swivel sockets located on each side of the stock near the rear of the lower receiver.
- The addition of a flash hider to the barrel of the M110, which also necessitates a modified QD Suppressor unit similar to that on the Mk 11.
- The M110's use of KAC's one-piece 30 mm scope mount instead of two separate scope rings.
Other changes were made when the XM110 made the transition to the M110. Features added were a buttstock hand-tightening knob, sling swivel sockets, a double sided bolt catch, and a button on the folding front sight to allow it to be locked into position.
On June 12, 2008, the M110 was ranked #2 on the U.S. Army's top ten inventions of 2007.[3]
According to performance specification (MIL-PRF-32316 (AR) w/AMENDMENT 1, 5 October 2009):
3.4.1.1.1 Accuracy. The distance between the mean point of impact of each shot group, both unsuppressed and suppressed, shall be not greater than 1.1 inches at 300 feet.
3.4.1.1.2 Dispersion. The average mean radius (AMR) (see 6.11), of each shot group shall be not greater than to 0.68 inches at 300 feet. All targets shall be fired on using M118LR ammunition or equivalent, using five (5) round groups.
AMR 0.68 inches for 5 round groups corresponds to 2.34 inches extreme spread for 10 round groups or 2.2 MOA extreme spread for 10 round groups 300 feet.
Replacement or reconfiguration of M110
The US Army has issued a request to the private sector to reconfigure or replace the current Knight Armament M110 sniper rifle as the current version of the M110 is not functioning well in the field requiring significant maintenance and replacement of parts.[4] The Army responded to the referenced article clarifying that the rifle is functioning perfectly and they are just looking for a smaller, lighter version of M110 for the spotter in a sniper team, providing the sniper is equipped with the new XM2010. 'The spotter will have an urban sniper support weapon which will be the M110. … Now you've increased the lethality of the team…' - Program Manager Lt. Col. Chris Lehner.[5]
The specifications the US Army has issued are as follows:[6]
- Operation: Semi-automatic
- Caliber: Compatible with 7.62x51mm NATO cartridges
- Accuracy: Capable of 1.3 minute of angle dispersion or better with match ammunition
- Size: Overall length shall be reduced using a shorter barrel and/or collapsible buttstock. Maximum length not to exceed 39 without suppressor. Desired minimum length is less than 36 with stock collapsed.
- Weight: Weight shall be under 9.0 lb for unloaded rifle without optics and accessories
- Grip: A modular, adjustable pistol grip.
- Trigger: A non-adjustable match style trigger.
- Hand guard: A forend that includes a fixed 12 o' clock rail with configurable 3, 6, and 9 o' clock rails.
- Sound suppressor: A muzzle mounted, detachable sound suppressor.
- Muzzle device: A compensator/muzzle brake compatible with the sound suppressor.
- Bipod: Tool-less detachment featuring cant and pan/track capability.
- Day optic: An Army specified variable power day optic and compatible rings.
- Back up sights: Iron sights offset 45 deg from the DOS.
- Sling attachment: Flush cup, quick detach sling attachment points.
- Other: The upgraded M110 must meet the operational and environmental requirements that were fulfilled by the original M110 SASS.
Sporting Use
In 2009, the M110 rifle and commercial equivalents were added to the list of NRA-legal US service rifles under rule 3.1.6 of the NRA High Power Rifle Rules.[7]
References
M110 Barrel Length Hairstyles
- ^DefenseLink: Contracts for Wednesday, July 16, 2008
- ^Lamothe, Dan (March 17, 2011). 'Corps fielding new semi-automatic sniper rifle'. Marine Corps Times. http://www.marinecorpstimes.com/news/2011/03/marine-corps-sniper-rifle-m110-031711w/. Retrieved 18 March 2011.
- ^'US Army Awards Top 10 Inventions of 2007'
- ^' Army Wants Lighter, Shorter M110 Semi-Automatic Sniper System
- ^' Army Speaks to M110 Performance/Upgrade
- ^FedBizOpps.com: M110 Semi-Automatic Sniper System(SASS) Reconfiguration
- ^NRA High Power Rifle Rules: Section 3. Equipment and Ammunition
External links
|
|
M110 Sniper Rifle
M110 Barrel Length
This entry is from Wikipedia, the leading user-contributed encyclopedia. It may not have been reviewed by professional editors (see full disclaimer)